KINETTIK Mask

R 3,499.99

R 4,000.00

Save R 500.01

LIMITED STOCK AVAILABLE

Quantity:

KINETTIK Mask – Advanced Cellular Light Therapy

Bring advanced LED light therapy into your daily skincare routine with the KINETTIK Mask. Designed with 240 LEDs, four targeted light modes, and a flexible silicone construction, it provides comfortable, even light coverage across the face.

Choose from red, blue, yellow, and near-infrared light to support your individual skincare goals, from enhancing radiance and maintaining smoother-looking skin to complementing acne-prone and calming skincare routines.

The smart multi-function controller lets you adjust the light mode, intensity, and treatment time, giving you a personalised facial wellness experience from the comfort of home.

Benefits

Supports Brighter, Healthier-Looking Skin – Helps refresh dull-looking skin and promote a more radiant complexion.
Supports Smoother-Looking Skin – Red light complements collagen-focused skincare and routines targeting the appearance of fine lines.
Complements Acne-Prone Skincare – Blue light supports routines designed for clearer-looking skin.
Calms and Soothes – Yellow light is ideal for gentle, calming facial care and a more even-looking complexion.
Near-Infrared Support – Can be used independently or together with the visible light modes for deeper light exposure.
Comfortable Full-Face Coverage – The soft, flexible silicone design contours comfortably to the face.
Personalised Treatments – Choose from three intensity levels and adjust the session time to suit your comfort and skincare goals.

Light Therapy Modes

Red Light – 630nm
Supports skin radiance, rejuvenation, and collagen-focused facial care.
Blue Light – 460nm
Ideal for acne-prone skincare routines and supporting clearer-looking skin.
Yellow Light – 590nm
Supports calming, soothing, and evening the appearance of the skin.
Near-Infrared Light – 850nm
Provides deeper light exposure and can be used independently or alongside any visible light mode.

What’s Included

1 × KINETTIK LED Face Mask
1 × Smart Multi-Function Controller
1 × Charging Cable
1 × Eye Protection / Eye Inserts
1 × Adjustable Head and Face Strap Set
1 × Canvas Storage Bag
1 × User Manual

How to Use

Prepare Your Skin – Cleanse your face thoroughly and remove makeup, sunscreen, oils, and skincare products. Ensure your skin is clean and dry.
Fit the Mask – Position the mask comfortably over your face and adjust the straps for a secure fit. Connect it to the smart controller using the supplied cable.
Power On – Press and hold the power button for approximately two seconds.
Select Your Light Mode – Press the M button to cycle through red, blue, and yellow light.
Add Near-Infrared Light – Press the NIR button to activate or deactivate near-infrared light. NIR may be used independently or with another light mode.
Adjust the Intensity – Press the E button to choose between the three energy levels. New users should begin at a lower intensity.
Set the Treatment Time – Use the T+ and T− buttons to adjust the session length. Recommended sessions are generally 10–20 minutes, depending on your experience and skincare goals.
Relax – Sit or lie back comfortably, keeping your eyes closed or wearing the supplied eye protection. The treatment will end automatically when the timer finishes.
Clean and Store – Switch off and disconnect the mask. Wipe it with a soft, slightly damp cloth and allow it to dry completely before placing it in the storage bag.

Charging and Battery Life

3000mAh rechargeable lithium-ion battery
Up to 2 hours of operating time
Approximately 4–5 hours for a full charge
Charge using the supplied USB cable
Disconnect the controller once fully charged

Safety and Precautions

⚠ Keep your eyes closed or use the supplied eye protection during every session.

⚠ Never stare directly into the LEDs.

⚠ Do not use the mask on broken, burned, infected, or severely irritated skin.

⚠ Do not sleep while using the device.

⚠ Keep the mask and controller away from water and out of reach of children.

⚠ Stop using the mask immediately if irritation or discomfort occurs.

Do not use the KINETTIK Mask if you have epilepsy or light sensitivity, use photosensitising medication, have active skin cancer or suspicious lesions, have an implanted electronic medical device near the treatment area, or experience discomfort from bright light exposure. If you are pregnant, breastfeeding, or have an underlying health condition, consult a qualified healthcare professional before use.

This product is intended for cosmetic and general wellness use. It is not intended to diagnose, treat, cure, or prevent any medical condition.

Warranty and Support

The KINETTIK Mask includes a 1-year warranty against manufacturing defects.

Need assistance? Contact us at hello@kinettik.com and include your order number, a brief description of the issue, and supporting photos or videos where applicable.

Consistent sessions. Visible progress.

Recovery You Can See

Give your skin the recovery it deserves. With consistent use, the KINETTIK Mask supports your skin’s natural renewal process, helping it look smoother, brighter and noticeably refreshed.

Before

After

240-LED Full-Face Array

240 individual LEDs distributed from forehead to jawline deliver even light coverage across the entire face, so every zone receives the same exposure with no hot spots or missed areas.

Four Clinical Wavelengths

Red at 630nm, blue at 460nm, yellow at 590nm and near-infrared at 850nm — the four bands light therapy research has focused on, each reaching a different depth of skin.

Three Intensity Levels

Adjustable energy output lets you start gentle and build as your skin adapts, so sensitive skin can begin low while experienced users run higher on the same device.

Cordless 3000mAh Battery

A rechargeable lithium-ion controller delivers up to two hours of operating time with no wall socket and no trailing cable, so you can use it on the couch, in bed, or while travelling.

4 Scientifically Studied Wavelengths

RED - 630nm

Reaches 2–3mm · The everyday mode

The most researched wavelength in LED skincare, and the one to use if you only ever use one. Red light complements collagen-focused routines and products targeting the appearance of fine lines.

Best for: Everyday use, dull-looking skin, routines aimed at firmness and smoother-looking texture, maintenance between facials.

When to run it: Three to five evenings a week. This is your baseline, build the other modes around it.

BLUE - 460nm

Reaches under 1mm · The breakout mode

Blue light is absorbed by porphyrins produced by acne-associated bacteria on the skin surface. Supports routines designed for clearer-looking skin.

Best for: Breakout-prone weeks, congested or oily areas, the run-up to a hormonal flare.

When to run it: Alternate with red during a breakout period rather than replacing red entirely. Blue works at the surface; red works deeper.

Why 460nm and not 415nm: 415nm sits on the peak absorption band but penetrates barely 0.3–1mm and is heavily absorbed by melanin, making it far less effective on deeper skin tones. 460nm reaches further and performs consistently across Fitzpatrick types III to VI.

YELLOW - 590nm

Reaches 0.5–2mm · The calming mode

The gentlest of the four. Supports soothing routines and a more even-looking complexion.

Best for: Skin that feels reactive, warm or sensitised, after sun exposure, long-haul travel, a hard training block, or a strong active in your routine.

When to run it: As a recovery session. Swap it in for red on days when your skin feels like it needs a break rather than a push.

NEAR-INFRARED - 850nm

Reaches 5–10mm · The invisible layer

You will barely see it working. Near-infrared passes deeper than any visible wavelength, through to the reticular dermis, and can run on its own or stacked underneath red, blue or yellow.

Best for: Adding depth to any session without extending its length. Also the mode to use if you want a session in a dark room without bright light in your eyes.

When to run it: Toggle it on alongside whichever visible mode you are already using. It does not replace them — it sits under them.

Reaches 2–3mm · The everyday mode

The most researched wavelength in LED skincare, and the one to use if you only ever use one. Red light complements collagen-focused routines and products targeting the appearance of fine lines.

Best for: Everyday use, dull-looking skin, routines aimed at firmness and smoother-looking texture, maintenance between facials.

When to run it: Three to five evenings a week. This is your baseline, build the other modes around it.

69%

of participants showed improvement in fine lines and wrinkles

Randomised controlled trial, 128 participants, red light at 611–650nm, twice weekly for 30 sessions. Collagen density rose and skin roughness fell significantly against the control group.

86%

improved by at least one acne grade using blue and red light

Seven-week study, 30 participants, blue with red light, ten minutes four times weekly. Both inflammatory and non-inflammatory lesions fell significantly.

50–60%

reduction in inflammatory acne lesions reported across blue light studies

Recovery, For Your Skin

Your body gets twenty minutes of recovery after training. Your skin gets nothing. The KINETTIK Mask fits into the part of the evening you are already wasting, lying down, winding down, doing nothing in particular. Put it on, set the timer, and let it work while you do not.

FAQ

Got Questions? We’ve Got the Answers

Which mode should I actually use?

Red at 630nm is the everyday default and has the strongest research behind it. Add blue during breakout-prone weeks. Use yellow when skin feels reactive or you want a gentler session. Near-infrared can run underneath any of them for deeper light exposure. If you are unsure, start with red only, three times a week, and add from there.

Why 460nm blue instead of 415nm?

415nm sits on the strongest absorption peak for the porphyrins produced by acne-associated bacteria, but it barely penetrates — roughly 0.3 to 1mm — and melanin absorbs a large share of it before it reaches the follicle. That makes it markedly less effective on deeper skin tones. 460nm penetrates further, delivers more optical power, and still sits within the porphyrin absorption range. For a country where most customers have Fitzpatrick type III to VI skin, it is the more sensible engineering choice.

How often should I use it, and for how long?

Three to five sessions a week of ten to twenty minutes suits most people, which matches the protocols used in published studies. More is not better — leave at least a day between sessions when you are starting out. The mask switches itself off when the timer ends.

How soon will I see a difference?

Light therapy is cumulative, not instant — treat it like training rather than a treatment. The published trials that showed measurable change ran for seven to fifteen weeks of consistent use before assessing results. Expect to give it a couple of months of regular short sessions. If you want an overnight change, this is not that product.

Does it hurt or heat up?

No. LED light therapy is non-thermal and non-abrasive — you will feel gentle warmth at most, and nothing touches or abrades the skin. Begin on the lowest of the three intensity levels and work up as you get used to it.

Do I have to use the eye protection?

Keep your eyes closed throughout, or use the supplied eye inserts. Never look directly into the LEDs. If bright light bothers you, use the inserts every session.

Can I use it with my existing skincare?

Yes, but run the mask on clean, bare skin first and apply serums and moisturiser afterwards. Anything sitting on the surface — makeup, sunscreen, oils, actives — blocks light from reaching the skin. If you use retinoids or acids, introduce the mask gradually and watch for sensitivity.

Is it safe for sensitive or darker skin?

LED phototherapy does not rely on heat or pigment targeting, so it is generally suitable across skin tones — unlike some laser treatments. Start at the lowest intensity with shorter sessions. Do not use it over broken, burned, infected or severely irritated skin, and read the full safety notes on this page.

What if something goes wrong with the KINETTIK Mask?

The mask carries a one-year warranty against manufacturing defects. Emailhello@kinettik.comwith your order number, a short description and photos or video where relevant. We are a South African company and you deal with us directly.

How many sessions do I get from one charge?

Roughly six to twelve, depending on how long you run each one and at what intensity. The 3000mAh controller gives up to two hours of total operating time, so at ten-minute sessions you will get close to twelve, and at twenty minutes closer to six. For most people using it three to five times a week, that is one charge every one to three weeks. A full recharge takes about four to five hours, so it is worth plugging in overnight rather than waiting for it.

Is it actually cordless, or does something plug in?

There is no cable to the wall — that is the part that matters. The mask itself connects by a short cable to a handheld smart controller, which holds the rechargeable battery and the buttons for mode, intensity and timer. So you can use it lying on the couch or in bed without being tethered to a plug point, but the controller does sit in your hand or beside you during the session.